(437) 777-4312

info@prestigecladding.ca

Request Quote

ACM PANELS & ARCHITECTURAL CLADDING.

PREMIUM LOOK. DESIGNED & INSTALLED RIGHT

ACM PANELS & ARCHITECTURAL CLADDING.

DESIGNED BY THE INSTALLER
INSTALLED BY THE DESIGNER

ACM PANELS & ARCHITECTURAL CLADDING.

DESIGNED BY THE INSTALLER
INSTALLED BY THE DESIGNER

Cladding Design & Installation Led By An Architectural Designer.
Serving Toronto & the GTA.

Prestige Cladding is a cladding contractor serving Toronto and the GTA, specializing in ACM panels, aluminum siding, and modern exterior cladding systems.

Most cladding projects are split between design and installation. At Prestige Cladding, one person stays responsible for both.
Eilyar leads each project from the start. He plans where every panel goes, selects the materials, and leads the installation on site while working alongside the crew to make sure everything lines up – across windows, along corners, and over the full facade.

Over 12 years and 87 completed projects across Toronto and the GTA – including Forest Hill, Lawrence Park, Rosedale, Yorkville, the Bridle Path, North York, Etobicoke, Mississauga, Oakville, and Vaughan – the result is consistent:

  • Straight lines across the facade
  • Even joints around windows and doors
  • Clean corners where materials meet

Once the cladding is installed, uneven lines and poor alignment are difficult to fix. This is where most projects fall short.

87

Projects Completed In
The GTA

100%

Customer Delight

12+

Years of Service

OUR SERVICES

Prestige Cladding installs ACM panels, architectural aluminum, fluted panels, Longboard, and custom facade systems for premium residential and commercial projects across Toronto and the GTA, including Vaughan, Mississauga, Oakville, Markham, and Richmond Hill.

Aluminum Composite Material (ACM​)
Clean, modern exteriors with straight lines and consistent joints that hold up for decades. The most widely specified modern facade material on custom homes across Forest Hill, Lawrence Park, North York, and the broader GTA. Best for flat elevations, front facades, and designs that rely on symmetry. Layout decisions happen at the design stage — that's where we earn the finished look.
Aluminum Plate Cladding
A true metal finish with sharp edges and visible depth. Best for column wraps, canopies, soffits, and feature areas on custom homes and commercial buildings across Toronto - anywhere the material is seen at close range. Holds crisp edges and returns. The backing has to be dead flat and the panels coordinated at fabrication for the finish to read as one continuous surface.
Fluted Panels
Shadow, rhythm, and texture on flat elevations - the difference between a modern facade that looks plain and one that looks designed. Best for feature walls, vertical sections, and entrance sections on custom homes across the GTA. The profile reveals any alignment error, so starting lines and spacing get planned before installation.
Perforated Metal Panels
Airflow, light control, privacy, and architectural pattern in one element. Best for mechanical screening, parking structures, feature facades, and areas where ventilation needs to look intentional rather than added-on. Installed across Toronto commercial and residential projects. The pattern has to read as one continuous design across the full surface - we plan the panel sequence before anything is cut.
Longboard & Luxyclad Cladding
The warmth of wood without the maintenance. No refinishing, no warping, no insect problems - designed for long-term performance in Ontario weather. Best for accents, soffits, upper sections, and adding contrast to ACM panels across modern GTA homes. Panels run in long continuous lines, so the finished look depends on planning the layout before the first board goes up.
Architectural Louvers and Columns
Integrated mechanical screening and column wraps that look like architecture, not equipment. Best for rooftop mechanical enclosures, vertical columns, and areas where ventilation has to sit inside the facade design. Used on Toronto commercial properties and modern residential builds. Louver spacing and frame alignment coordinate with the surrounding cladding so everything reads as one surface.
Custom Metal Flashing
The detail that keeps water out of your walls. Protects windows, doors, parapets, rooflines, corners, and every panel termination from water getting behind the cladding. Designed and installed as part of the facade on every Prestige project across Toronto and Southern Ontario - not added after. Missing or bad flashing is the main reason homeowners call us to fix other people's work.
Composite Decking
Outdoor living space that stays stable and looks good without annual staining, sealing, or board replacement. Best for decks, terraces, and rooftop spaces tied into the facade so the deck reads as part of the home, not a separate element. Installed across the GTA on custom home exteriors. The structure underneath controls long-term performance — board spacing, slope, and framing all set before installation.
Get A Free Quote Now
Modern Toronto house exterior with black ACM cladding

OUR PROCESS

Consultation - every project starts with a conversation. Bring architectural drawings, a reference image, or just an idea. We assess the scope, discuss materials, and give you an accurate estimate.

We design the complete cladding system for your building. Materials, panel layouts, and every corner and transition are carefully thought out before a single panel is ordered. The goal is an exterior that looks exactly as you imagined it.

Fabrication For materials requiring off-site fabrication, ACM panels, cassette panels, and aluminum plate, shop drawings are produced and production is coordinated with our fabrication partner.

The same person who designed your exterior installs it. What you imagined at the start is what you see at the end.
Request a consultation

PROJECT EXAMPLES

Aluminum Composite Panels (ACM)

Custom Architectural Metal

Architectural Aluminum Siding

Composite Decking Installation

WHO WE WORK WITH

HOMEOWNERS

For custom homes, full exterior renovations, and modern facade systems across Toronto and the GTA, including Forest Hill, Rosedale, Lawrence Park, Yorkville, the Bridle Path, and Oakville. ACM panels, aluminum cladding, fluted panels, and Longboard installed to the same standard on every project. From the first conversation to the finished facade, one person is responsible for the result.

ARCHITECTS & DESIGNERS

Available for cladding consultation during design development on residential and commercial projects across Toronto and the GTA. ACM panels, aluminum cladding systems, fluted panels, and custom facade details. Questions about material performance, system compatibility, and detail feasibility are easier to answer before the design is finalised than after.

BUILDERS & CONTRACTORS

For builders working on custom homes and commercial projects across Toronto and the GTA.

Cladding is one of the exterior scopes with the biggest visual impact.

We define panel layout, material transitions, and key details early so the finished facade comes together clean.

The result is a facade where everything looks right.

CLADDING CONTRACTOR - TORONTO & THE GTA​

Prestige Cladding is a cladding contractor serving Toronto and the Greater Toronto Area. Projects completed in Forest Hill, Lawrence Park, Rosedale, Yorkville, the Bridle Path, Leaside, Moore Park, and throughout midtown and north Toronto. Also serving North York, Etobicoke, Scarborough, Mississauga, Oakville, Burlington, Vaughan, Markham, and Richmond Hill.

Available for projects in Hamilton, Guelph, Kitchener-Waterloo, Barrie, and the Blue Mountain corridor.

COMMON QUESTIONS

ACM cladding refers to exterior facade systems built with aluminium composite panels - two thin aluminum skins bonded to a lightweight core. Widely used across Toronto and the GTA for modern residential and commercial facades because the panels are rigid, lightweight, and available in a wide range of colours and finishes. Panel layout and detailing must be finalized before fabrication - dimensions are fixed at that point.
A cladding contractor designs, coordinates fabrication, and installs the exterior facade system of a building. This includes panel layout, joint detailing, corner resolution, transitions at windows and openings, and flashing. At Prestige Cladding, the architectural designer responsible for the design is also the person leading the installation.
The most common systems on contemporary GTA residential projects are aluminium composite panels (ACM), architectural aluminum siding (Longboard, Luxyclad), fluted aluminum panels, fiber cement, and cassette panel systems. Many projects combine two or more materials on the same facade. The right choice depends on the architectural design, budget, building height, and long-term maintenance expectations.
Panel layout, joint spacing, corner detailing, and how materials transition across the building determine how the finished facade looks. These decisions are made before fabrication - adjustments on site after panels are fabricated are limited. Working with a contractor who resolves these details at the design stage is what produces a clean result.
No. Homeowners without drawings can book a free consultation and we'll review the project from site. For new construction or complex renovations, we can work from architectural drawings or produce a layout plan as part of the estimation process.
Toronto and the Greater Toronto Area, including North York, Etobicoke, Scarborough, Mississauga, Oakville, Burlington, Vaughan, Markham, and Richmond Hill. We also work in Hamilton, Guelph, Kitchener-Waterloo, Barrie, and the Blue Mountain corridor.

Ready to Talk About Your Project?

Residential and commercial inquiries welcome.

Eilyar personally reviews every new project inquiry.

 

Schedule a Free Consultation  →

what clients say
ABOUT US

"We used Prestige Cladding for a full exterior update with ACM panels and aluminum siding. What stood out right away was how everything was planned before work started. We could see how the panels would line up, where the joints would fall, and how the finishes would look around windows and corners. The install went smoothly and the final result looks exactly like what was discussed. Lines are straight, everything is consistent, and the house finally looks finished the way we wanted. No surprises during the project, which is rare with construction."
Martin J

"I spoke to a few contractors before moving forward, and most of them jumped straight into pricing. Prestige took a different approach and walked through the layout, materials, and potential issues first. That made a big difference. There were a few things I would have done wrong if I hadn’t had that guidance. The end result looks clean and high-end, but more importantly, it feels like it was done properly. No loose ends, no rushed details. I’d recommend them if you want it done right the first time."
Sharon W.

"We had a bad experience on a previous project, so we were cautious going into this. What I appreciated with Prestige was the communication and attention to detail. They explained how everything would be installed, not just what it would look like. During the install, the crew kept things organized and the site clean, which made it easier living through the process. The finish is exactly what we were hoping for. Clean lines, consistent spacing, and everything fits properly. You can tell there was thought put into it before anything was built."
Kate C.

Creative
Expertise
Flexible
Dedicated

info@prestigecladding.ca

Get a premium exterior for your home, designed and installed right from the start >>>